SmartMonTools Check Up

Test

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       2158
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       2586
  5 Reallocated_Sector_Ct   0x0033   043   043   050    Pre-fail  Always   FAILING_NOW 1962
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   093   093   000    Old_age   Always       -       3054
10 Spin_Retry_Count        0x0033   151   100   030    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       2463
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       164
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       103
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       3939
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       38 (Min/Max 14/47)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       516
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       12
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       1
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       8215
222 Loaded_Hours            0x0032   093   093   000    Old_age   Always       -       2901
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       340
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 52786 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 52786 occurred at disk power-on lifetime: 3040 hours (126 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 da e3 be 27 64  Error: UNC at LBA = 0x0427bee3 = 69713635

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 40 08 5a 2e 27 40 00      00:22:59.661  READ FPDMA QUEUED
  60 08 00 32 20 27 40 00      00:22:59.652  READ FPDMA QUEUED
  60 18 f8 9a fa 26 40 00      00:22:59.636  READ FPDMA QUEUED
  60 a0 f0 90 fb 94 40 00      00:22:59.593  READ FPDMA QUEUED
  60 08 e8 60 82 d2 40 00      00:22:59.579  READ FPDMA QUEUED

Error 52785 occurred at disk power-on lifetime: 3039 hours (126 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 32 e3 be 27 64  Error: UNC at LBA = 0x0427bee3 = 69713635

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 40 50 ca 1d 27 40 00      00:22:55.314  READ FPDMA QUEUED
  60 40 48 a2 63 27 40 00      00:22:55.307  READ FPDMA QUEUED
  61 08 40 d0 ea 70 40 00      00:22:55.289  WRITE FPDMA QUEUED
  61 08 38 50 d1 70 40 00      00:22:55.289  WRITE FPDMA QUEUED
  61 08 18 40 cf 70 40 00      00:22:55.289  WRITE FPDMA QUEUED

Error 52784 occurred at disk power-on lifetime: 3039 hours (126 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 ba e3 be 27 64  Error: UNC at LBA = 0x0427bee3 = 69713635

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 f0 e2 28 27 40 00      00:22:51.271  READ FPDMA QUEUED
  60 40 e8 ea 0e 27 40 00      00:22:51.256  READ FPDMA QUEUED
  60 08 e0 60 c9 c0 40 00      00:22:51.222  READ FPDMA QUEUED
  60 18 d8 2a f5 26 40 00      00:22:51.206  READ FPDMA QUEUED
  60 40 d0 8a 46 27 40 00      00:22:51.192  READ FPDMA QUEUED

Error 52783 occurred at disk power-on lifetime: 3039 hours (126 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 12 e3 be 27 64  Error: UNC at LBA = 0x0427bee3 = 69713635

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 40 b0 b2 fe 26 40 00      00:22:47.126  READ FPDMA QUEUED
  60 00 a8 90 fa 94 40 00      00:22:47.121  READ FPDMA QUEUED
  60 00 a0 90 f9 94 40 00      00:22:47.121  READ FPDMA QUEUED
  60 00 98 90 f8 94 40 00      00:22:47.121  READ FPDMA QUEUED
  60 00 90 90 f7 94 40 00      00:22:47.121  READ FPDMA QUEUED

Error 52782 occurred at disk power-on lifetime: 3039 hours (126 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 92 e3 be 27 64  Error: UNC at LBA = 0x0427bee3 = 69713635

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 40 b0 a0 f5 94 40 00      00:22:42.981  READ FPDMA QUEUED
  60 f8 a8 98 f3 94 40 00      00:22:42.979  READ FPDMA QUEUED
  60 80 90 e0 be 27 40 00      00:22:42.965  READ FPDMA QUEUED
  60 08 88 f4 58 e3 40 00      00:22:42.965  READ FPDMA QUEUED
  61 08 80 80 96 1e 40 00      00:22:42.965  WRITE FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: unknown failure    90%      3053         0
# 2  Short offline       Completed: unknown failure    90%      3053         0

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.